Mobile paint stripping replaces days of sanding, scraping and chemical stripper with a few hours of blasting. We bring the rig to the house, the car, the fence or the factory and take it back to a clean substrate.
The right media depends on what’s under the paint. Soda for car panels, timber and heritage brick; dustless for big areas like facades and pool shells; a harder abrasive for heavy coatings on steel.
No caustic strippers means no toxic run-off into gardens or drains, and no chemical residue to neutralise before you repaint.
How soda blasting works →Chemical strippers are slow, smell, and leave residue that has to be neutralised before repainting. Sanding takes days, fills the air with dust and rounds off edges and detail.
Blasting strips paint in hours, reaches into grooves and corners, and leaves a clean surface. It is used on car bodies, weatherboards, timber furniture, brick, steel and concrete.
Paint on homes built before the 1970s may contain lead. Lead dust is hazardous, so suspect paint is tested before stripping.
Where lead is present, the job is planned around containment and correct disposal, or a different approach is recommended. Tell us the age of the building when you book.
Older paint is assessed for lead before stripping, and the approach is planned around the result.
The media is chosen for what is underneath: soda for timber and panels, dustless for large areas.
The surface is rinsed clean and left ready for primer, without chemical residue to neutralise.
From the CBD to the Central Coast, Newcastle, Wollongong and regional NSW — travel is priced into your quote up front.
Yes. Soda is gentle on timber and won’t raise the grain the way sanding or harsh abrasives can.
Tell us if you suspect lead paint. We’ll assess it on site and advise on containment and the right approach.
Usually straight after a rinse. On steel, prime promptly to prevent flash rust.
Yes. Soda strips paint from timber without raising the grain. Older paint is checked for lead first.
Yes. Timber and metal furniture can be stripped at your home or workshop.
Tell us what needs stripping and where it is. Craig will come and look, test the surface, and give you a fixed price.
{{ m.lead }}
{{ p }}
Every service below is delivered on site, anywhere in Sydney and NSW.
{{ p }}
{{ s.p }}
From the CBD to the Central Coast, Newcastle, Wollongong and regional NSW — travel is priced into your quote up front.
{{ f.a }}
Tell us what needs stripping and where it is. Craig will come and look, test the surface, and give you a fixed price.