,

Vapour Blasting Services Sydney

Vapour Blasting Services Sydney - Soda-Tec

What is Vapor Blasting and How Does it Work?

Vapor blasting is increasingly becoming a preferred technique of surface refinishing process for unique applications that need premium quality surface finish. Using a balanced combination of water, detergents and compressed air, vapor blasting helps remove oxidization and corrosion, thus restoring all types of metal components, parts and castings back to their original condition. The process then seals the pores of the metal, which can range from copper to aluminum to bronze to brass, leading to a glossier and more level surface. 

Outstanding Vapor Blasting Solutions for All Your Parts

Professional vapor blasting services by [company name] starts with a discussion about your surface preparation requirements, followed by a proposed processing method by our experienced and qualified technicians. As pioneers in vapor blasting service providers in Sydney, we are committed to forge strong and long-lasting relationships with all our clients. With short lead times, valuable processing recommendations and a cooperative staff to assist you in each and every step, we are counted among the leading vapor blasting companies in Sydney. 

You Can Count on Us!

Perhaps you need to renew the finish on your motorcycle components, or you want oxide and discoloration to be gently removed from the chassis parts, leaving a lustrously fine finish afterwards? Vapor blasting may be the perfect solution you are looking for to make your motorbike parts look new again. Using the most advanced vapor blasting equipment in Sydney, we produce the finest end product, and a better bottom line. 

/by
,

Wet Blasting Services Sydney

Wet Blasting Services Sydney - Steel Preparation

When Do You Need Wet Blasting?

The correct surface preparation is indispensable regarding the success of any kind of protective coating or bonding process. Hence, the significance of getting rid of surface contaminants such as dirt, oil, grease, old coatings, residues and oxidation cannot be overemphasized. Partial or deficient removal of surface deposits on previously plated surfaces can lead to bonding or adhesion failure later. In a nutshell, final adhesion is dependent upon the initial quality of the surface preparation prior to the process of coating or bonding, and even the most advanced and expensive coating system may fail if the preparation of the surface is incorrect or inadequate. 

Leaders in Wet Blasting Technology 

Wet blasting by Sodatec is a unique surface preparation technology that utilises a three-part mixture of water, media and controlled amounts of compressed air to apply a special ‘scrubbing’ action on the surface which you want to treat. The desired result is a thorough cleanliness and surface smoothness that is never possible with traditional abrasive blasting processes. Wet blasting technology is cleaner, faster and yields better results than dry blasting. Wet abrasive blasting is also much more versatile. Whatever your industry application needs be, our professional wet blasting solutions can improve them. Count on our first-rate, consistent quality, wet-slurry liquid finishes with no abrasive embedment in the substrate. 

Expert Wet Blasting Solutions in Sydney 

Through our customised system designs, compact equipment footprints and hassle-free service, Sodatec enables you to integrate this revolutionary time-and-money saving wet abrasive process right onto your production floor. Our focus, passion and dedication have made us very good at what we do! 

/by
,

Hydro-Blasting Services Sydney

Hydro Blasting Services Sydney - Soda Tec

Why Do You Need Hydroblasting Services? 

Dirty pipes, soiled equipment and clogged tanks in any industrial estate are always a hassle to deal with. They not only choke business processes causing either overflows or costly damages on the materials, but also lead to work delays by disrupting daily operations. Even more so, dirty pipes and machinery mean the potential transfer and accumulation of dirt deposits over time – something that you certainly do not want to happen.  

Hydroblasting stands out as one of the most proficient techniques of performing a variety of industrial blasting applications today. These may include surface preparation for boilers and tanks, hydro-demolition in the tearing down of concrete and the use of high-pressured water apparatus to eliminate surface debris, residue and dirt deposits. 

How Our Hydroblasting Techniques Can Benefit You?

Sodatec is a professional hydroblasting industrial cleaning service company in Sydney providing a wide range of water blasting capabilities including, but not limited to:

  • Tube cleaning of boilers and reactors; 
  • Cleaning of interior and exterior surfaces;
  • Equipment cleaning and hydro-demolition; 
  • Cleaning of pipes, vessels, tanks, sewer jetting and drainage lines.

Cost-Effective: We offer you the most cost-effective and economical hydroblasting cleaning solutions in Sydney that will yield proven results. 

Safe to Use: As a rule, we never use harsh chemicals or abrasives to perform any maintenance for our clients. The hydroblasting methods employed by our experts use only water which works perfectly with deposit removal. 

Ensures the Integrity of Your Structure: We use only adjustable and flexible hydroblasting nozzles and hoses when cleaning your pipes to avoid damage to your structures. 

/by